Divinol Öl-Ex 82
Art-Nr.: 67482Divinol Öl-Ex 82 is a new multipurpose oil and chemical absorbing agent - Type I, Type II and III R, which can be universally used in industry and commerce, on roads and other trafficked areas as well as on water. Grained, non-dusting material based on polyurethane (grain size 0.5-4 mm) to absorb only liquids (not the water) such as oil, drilling emulsions, paints, acids, alkalis, etc...
Environmental Impact:
The Federal Environment Ministry of Germany published "Requirements for oil binders" are fully met. The product is officially tested and approved under Certificate No. 75 015/05 dated 31.05.2005.
- chemically neutral
- very good stability, even oil-saturated non-slip
- not made of fiber structure but leaves
Would you like to have further information? Registered customers additionally have access to downloads and datasheets. Please log in or register for our protected customer area.
Registration / Login
Product Details
| Appearance | Granules yellow / brown |
| Flash point (Cleveland) / DIN ISO 2592 | > 300 °C |
| pH-value / DIN 51 369 | 7 |
| Composition | Rigid polyurethane foam |
Divinol Öl-Ex 82 is dipersed with a layer thickness of up to 3 mm and swept up with a broom after absorption. Old, oil-contaminated soil is firstly treat with solvent and then with Divinol Öl-Ex 82. The content of the bag (10 kg corresponds to 40 l) binds approximately 23 liters of fuel oil.
Due to the fact that Divinol Öl-Ex 82 won`t absorb water, there is no expensive disposal of e.g. a water-oil mixture, but only of the absorbed chemical. Divinol Öl-Ex 82 is ideal for thermal-energy recovery use and musten`t be disposed necessarily. Thus, valuable energy is saved and serves as combustible material. Divinol Öl-Ex 82 burns oil-soaked nearly residue-free with a minimum ash content of 2%.