Multicut HSC 10
Art-Nr.: 26420- low viscous high-performance cutting oil
- on the basis of a high quality base liquid, low in aromatics and with low tendency to cause mist
- contains native and synthetic fatty components
- with anti-oil mist additives
- with sulphurous and phosphorous additives
- free of chlorine and zinc
Would you like to have further information? Registered customers additionally have access to downloads and datasheets. Please log in or register for our protected customer area.
Registration / Login
Product Details
| Colour / DIN ISO 2049 | L 2.5 |
| Density/15°C / DIN EN ISO 12185 | 870 kg/m³ |
| Viscosity/40°C / ASTM D 7042 | 11 mm²/s |
| Flash point (Cleveland) / DIN ISO 2592 | > 160 °C |
| Pour point / ASTM D 7346 | -12 °C |
Multicut HSC 10 is well-suitable for high speed cutting operations (HSC). It contains a new combination of
EP-additives and can be used for many cutting operations of free cutting mild steels, case-hardened and heat-treated steels, high-alloyed rust and acid resistant steels, light alloys as well as for non-ferrous heavy metals to a limited extent. Working processes as turning, milling, drilling but also thread cutting and deep-hole drilling can be handled without any difficulty. Very good results are achieved especially in chip removing operations of titanium alloys.
In many cases chlorine containing products can be substituted by Multicut HSC 10.
The low viscosity guarantees a high rinsing and cooling effect.