Multical IP 70
Art-Nr.: 29500- alloyed calibration oil with neutral odour
- on the basis of a aromatic free solvent
Would you like to have further information? Registered customers additionally have access to downloads and datasheets. Please log in or register for our protected customer area.
Registration / Login
Product Details
| Colour / DIN ISO 2049 | lighter 0.5 |
| Density/15°C / DIN EN ISO 12185 | 800 kg/m³ |
| Viscosity/20°C / ASTM D 7042 | 3.3 mm²/s |
| Flash point (Pensky-Martens) / DIN EN ISO 2719 | > 61 °C |
Multical IP 70 is a non water-miscible, solvent-containing and wax-free calibration oil for calibration processes of demanding difficulty.
During a possible steam treatment of the parts there will be no coking residues or other negative influences
on the surface of the sintered parts, provided that the steam treatment furnace is adjusted properly.
Multical IP 70 is applied by spraying on the sinter metal parts. An oily film is built after the application.
Due to the low viscosity the application by immersion is also possible - if sufficient time is provided to drain
the excess oil.