Multical M 3
Art-Nr.: 26810- mineral oil containing calibration oil
Would you like to have further information? Registered customers additionally have access to downloads and datasheets. Please log in or register for our protected customer area.
Registration / Login
Product Details
| Colour / DIN ISO 2049 | lighter 1.0 |
| Density/15°C / DIN EN ISO 12185 | 820 kg/m³ |
| Viscosity/20°C / ASTM D 7042 | 6.5 mm²/s |
| Viscosity/40°C / ASTM D 7042 | 4 mm²/s |
| Flash point (Cleveland) / DIN ISO 2592 | > 100 °C |
Multical M 3 is a non water-miscible, solvent-free and wax-free calibration oil for calibration processes of demanding difficulty.
During a possible steam treatment of the parts there will be no coking residues or other negative influences
on the surface of the sintered parts, provided that the steam treatment furnace is adjusted properly.
Multical M 3 is applied by spraying on the sinter metal parts. An oily film is built after the application. Due to the
low viscosity the application by immersion is also possible - if sufficient time is provided to drain the excess oil.