Multidraw Drylube E 1
Art-Nr.: 22200- hotmelt on the basis of mineral oil
- contains hydrocarbons of higher melting weight
- free from water
- free of solvents
- resistant to ageing
- shows excellent corrosion protection properties
Would you like to have further information? Registered customers additionally have access to downloads and datasheets. Please log in or register for our protected customer area.
Registration / Login
Product Details
| Colour / Appearance | solid/brown |
| Density/15°C / DIN EN ISO 12185 | 870 kg/m³ |
| Viscosity/100°C / ASTM D 7042 | 11 mm²/s |
| Flash point (Cleveland) / DIN ISO 2592 | > 220 °C |
Multidraw Drylube E 1 complies with the requirements of the VDA (German association of the automotive industry) performance specifications of all German automobile manufacturers.
Multidraw Drylube E 1 is a coil coating lubricant for all kinds of metal (steel, zinc coated steel, pre-phosphatized steel, aluminium and stainless steel). Application is usually done by electrostatic oiler.
After being applied, the product leaves a touch-dry coating on the metal surface. Due to its good flexibility
and sliding properties, the semi-dry film enables difficult forming operations.
Multidraw Drylube E 1 is preferably applied in rolling mills by electrostatic application in liquid condition.
Before applying, Multidraw Drylube E 1 must be heated up to 70 °C. In filter systems, the temperature
should not fall below 60 °C. The solidification point is approx. 40 °C.
In case the lubricant remains in the storage tank in stand-by mode for a longer period, we recommend
a temperature of 50 - 60 °C.
In heated tanks Multidraw Drylube E 1 should constantly be circulated to guarantee a uniform temperature distribution.