Multicor DW 3 Extra Light
Art-Nr.: 90500- Dewatering fluid
- based on an isoparaffinic hydrocarbon mixture
- neutral odour
- free of aromatics
Would you like to have further information? Registered customers additionally have access to downloads and datasheets. Please log in or register for our protected customer area.
Registration / Login
Product Details
Characteristics
| Colour / DIN ISO 2049 | lighter 4.5 |
| Density/15°C / DIN EN ISO 12185 | 790 kg/m³ |
| Viscosity/20°C / ASTM D 7042 | 2.3 mm²/s |
| Flash point (Pensky-Martens) / DIN EN ISO 2719 | > 61 °C |
| Type of protective film | waxy |
| Film thickness after dipping | 0.5 - 1 µ |
| Condensation atmosphere (AHT) / DIN EN ISO 6270-2 | 40 cycles |
| Salt spray test / DIN EN ISO 9227 | 15 hour(s) |
Multicor DW 3 Extra Light with very intensive dewatering quality and high corrosion protection.
It is used for longer periods of time for the drying of wet mass-produced or small parts manufactured through forming by turning, pressing or punching. It penetrates underneath and displaces water and humidity. At the same time, the surface of the work piece is coated with a waxy protection film.
The product is applied in as-delivered condition by dipping, spraying or manually e.g. by brush.
placeholder